Selection, use, maintenance of massage systems

Enjoy enhanced relaxation in the tub with different massage systems and nozzle placement.

Both massages in action.

Hydro massage - the pump emits jets of water through the nozzles, which create a massaging effect on the body. The intensity of the massage can be adjusted by opening or closing the air supply to the nozzles. This system has 360-degree adjustable nozzles that allow the user to direct the water flow.

For certain systems, it is possible to close the flow by rotating the nozzle itself or its core.

Compared to air massage, it is exposed to various sediments and impurities inside it, so we recommend using a filter, that is, the water is first filtered before entering the massage system. In the opposite case, depending on the frequency of use, it is necessary to clean the system with a special hydromassage bathtub cleaner by pouring it into the tub in the right concentration and turning on the massage for 15 min.

In winter, no additional actions are required, the entire massage is installed with drops and the water flows out of the entire system by itself.

The most popular position of the nozzles is 6-8 along the perimeter, to which you can additionally add the position of 6 ultra nozzles, in which all 6 nozzles are for one person. Various individual positions of up to 14 nozzles per person, rotating nozzles, etc. are possible.

Air massage - the air blower blows air through the nozzles, creating bubbles that create a bubbling and foaming sensation on the skin.

Compared to hydromassage, for which the massage effect is stronger but concentrated in one place, in air massage the bubbles cover a larger part of the body, thus creating a massage effect.

Also, no maintenance is required for this massage, as the water does not circulate in it, especially well suited for rental tubs.

In winter, it is necessary to turn on the massage for 10 - 20 seconds, because due to the peculiarities of the system's construction, the water does not drain completely by itself, about half of the installed massages are air and it does not make it difficult to use and use the tub in the long term.

The most popular position of the nozzles is 12 around the perimeter, placed in the lower back to maximize the massage effect, installing more 18 or 24 nozzles they are also placed near the legs. Ultra-type nozzles differ in structure and a larger amount of bubbles.

Both of these massages have a relaxing and soothing effect on the muscles and joints. They are often used to relieve tension, stress and pain, and can help improve circulation and promote general relaxation.

Each massage has a unique effect, so we recommend choosing both at once. It is possible to additionally equip with massage systems afterwards, but it will be much more expensive than if you buy it right away.